Go CCIE Go!! - A Cisco Certified Internetwork Expert

Yep, you are correct here.
There are two main differences between MQC policer and CAR.
1) Exceed action is “pseudo-random” with CAR (compound/actual debt algorithm) to simulate RED behavior. With MQC there is three-color single-rate marker algorithm. There is no “violate” action with CAR and “exceed” action is “deterministic”.
2) “Be” value with CAR is used to calculate […]

Hi Guys, Can someone help me understand the below 2 lists. I am getting a little confused of how to interpret the characters within the brackets. Correct my interpretations.
ip as-path access-list 11 permit ^555 ([^ ]+ )*(555)( {.*}|)$ […]

Yes
On Fri, 25 Aug 2006 Cisco certification wrote : >Hi, > >You have tried to post to a GroupStudy.com certification mailing list. Because >the server does not recognize you as a confirmed poster, you will be required >to authenticate that you are using a valid e-mail address and are not a >spammer. […]

Can you add *ip directed-broadcast* on R2 interface 3.Normally router block broadcast traffic.
On 9/16/06, sabrina pittarel wrote: > > Hi, > I’m trying to use the multicast helper feature to convert from multicast > to directed broadcast and into multicast again. > Topology > > Mcast […]

Hi Group,
While re-testing some QoS sections, I came accross this lab task, which solution I consider partially wrong. This will revive an old discussion about exactly this task (CAR to MQC configuration transition).
I won’t copy the whole CAR configuration, as I have problems with the following part of it only:
existing rate-limit: […] rate-limit input access-group […]

Hi Group, I have a site connected 2 core routers running Multicast. I need to configure failover RP. I mean by default the traffic should go to one RP if it fails then switchover to the next RP. Will AnycastRP will help me out in this issue ? I need your comments on this.
Thanks

here is my observation . first the IP ACL can be applied on the L2 interfaces according ot the Docs , however it will apply only on the inbound direction ( to the switch ) which means it can filter the outbound traffic of certain host ..not the […]

Hello Group, I am looking for a lab date in Brussel in the last 2 weeks of November or in the any dates in December. If any one has foreseen a date in that period in Brussels and planning to drop, can you kindly send me an off-line email. Thanks […]

Hey Man Indeed a Touching Victory over the demon with 9 routers,2 switches.
Cheers!! All the best…..
Swaroop.
>From: “Gianpietro Lavado” >Reply-To: “Gianpietro Lavado” >To: “Cisco certification” >Subject: First 5 digits going to Peru >Date: Sat, 16 Sep 2006 09:56:38 -0500 > >Hello all! > > Finally, after my 3rd attempt, and […]

Please post the actual configurations for the group to look at and comment on, as well as any show / debug output that may be useful.
On 17 Sep 2006 04:46:13 -0000, pankaj kumar wrote: > > Hello All, > Yesterday I was practicing IPV6 over frame-relay with RIP & > encountered uncertain problem.There […]